WISI Koaxialkabel MK96A, 100m Blister

WISI Koaxialkabel MK96A – 100m Blister, 75 Ohm Antennenkabel

The WISI MK96A is a 75 Ohm coaxial antenna cable supplied in a 100-metre blister pack. It is designed for private-installation use and carries satellite or terrestrial TV signals with minimal loss over long runs.

• 100 m length in a compact blister format — ideal for one-installation runs without intermediate joints
• 75 Ohm impedance matched for standard satellite and terrestrial antenna systems
• 6.8 mm cable diameter with 19.4 dB attenuation per 100 m at 1 GHz — reliable signal integrity across the full length
• 24-month manufacturer warranty provides long-term reliability for fixed indoor or outdoor installations

Das zeichnet das WISI MK96A aus

Unlike pre-cut patch cables, the MK96A is supplied as a continuous 100-metre reel in a blister, allowing custom-length installations without splicing. The 75 Ohm impedance and low-loss design at 1 GHz make it suitable for both satellite and DVB-T reception in private households.

Ideal für...

Home installations requiring a single long cable run from an attic or wall outlet to a satellite dish or TV set-top box. Particularly suited to multi-room setups where one cable feeds several outlets via a distribution amplifier.

Anwendung von WISI Koaxialkabel MK96A

1. Measure the required run length and cut the cable to size, leaving a margin for routing
2. Attach the appropriate F-connector or antenna plug to each end using a compatible crimp tool
3. Route the cable along the designated path, avoiding sharp bends that exceed the minimum bend radius
4. Connect the cable to the antenna input on the receiver or distribution amplifier and to the dish or wall outlet