Visaton Keramikwiderstand 6.8 Ohm, 10 W

Visaton Keramikwiderstand 6,8 Ohm, 6,8 W

The Visaton Keramikwiderstand is a precision ceramic resistor rated at 10 ohms with a 10 W power dissipation, designed for use in loudspeaker crossover networks and other audio applications.

• 6,8 ohm nominal resistance with 10 W power rating provides reliable current limiting in speaker crossover circuits
• Ceramic construction ensures stable performance across a wide temperature range
• Compact design fits standard chassis mounting configurations for Visaton speaker systems
• Low inductance winding minimises signal distortion in the audio path

Das zeichnet den Visaton Keramikwiderstand aus

The ceramic body delivers consistent resistance values under varying thermal conditions, making it suitable for continuous operation in active speaker crossovers. Its 10 W rating provides ample headroom for typical loudspeaker driver protection circuits without the bulk of higher-wattage wirewound alternatives.

Ideal für...

DIY loudspeaker builders and professional AV installers working with Visaton speaker systems that require precise crossover tuning. The 10 ohm value is a standard specification in Visaton crossover designs, ensuring compatibility with the manufacturer's recommended build configurations.

Anwendung von Visaton Keramikwiderstand 6.8 Ohm, 10 W

1. Install the resistor in the crossover network between the amplifier output and the speaker driver, following the Visaton crossover schematic for the specific model
2. Ensure the resistor is mounted with adequate clearance for airflow, as the ceramic body dissipates heat through its surface
3. Verify the 6.8 ohm value with a multimeter before final assembly to confirm it falls within the component's tolerance range
4. Solder connections cleanly to avoid introducing additional resistance or cold joints that could affect crossover performance over time