The Swaytronic PV Solar Connection Cable is a 10-metre open-end cable with 2×4 mm² cross-section, designed for connecting photovoltaic system components. It provides a reliable, low-resistance connection between solar panels and inverters or charge controllers.
2×4 mm² copper conductors handle high solar currents with minimal voltage drop over the full 10 m length
Open-end connectors on both sides enable direct, tool-free termination at panel junction boxes and inverter inputs
UV-resistant jacket rated for outdoor deployment across the full solar installation lifespan
1.235 kg total weight keeps cable runs manageable without adding significant load to roof-mounted systems
What sets the Swaytronic PV Solar Connection Cable apart
Unlike pre-terminated cables with fixed connector types, this open-end design lets you terminate with the connectors best suited to your specific panel and inverter combination. The 2×4 mm² gauge is sized for typical residential PV string currents up to 25 A, and the 10 m length covers most standard roof runs without requiring mid-run junctions.
Ideal for...
Residential and commercial rooftop solar installations where a flexible, unterminated connection cable is needed between PV modules and the inverter or charge controller. Suitable for new builds and retrofit projects on pitched or flat roofs with standard cable routing.
Application of Swaytronic PV Solar Connection Cable
Route the cable from the PV array junction box to the inverter location, keeping runs as short as practical to minimise voltage loss
Strip and terminate each open end with the appropriate MC4 or equivalent connector for your panel and inverter
Secure the cable along the designated cable tray or conduit, ensuring no sharp bends below the minimum bend radius
After installation, verify continuity and insulation resistance before energising the system
Swaytronic specialises in solar installation accessories and cabling solutions for photovoltaic systems. The brand focuses on durable, weather-resistant components designed for both residential and commercial PV deployments. Swaytronic products are engineered to meet the demands of outdoor solar environments with long service life.
It connects photovoltaic panels to inverters or charge controllers in a solar installation, providing a reliable 10-metre link with 2×4 mm² conductors.
Both ends are open (unterminated), allowing you to fit the connector type that matches your specific panel junction box and inverter input.
2×4 mm² copper conductors, rated for solar string currents up to approximately 25 A with minimal voltage drop over the 10 m length.
Yes, the UV-resistant jacket is designed for permanent outdoor deployment on rooftop and ground-mounted solar installations.
One 10-metre Swaytronic PV Solar Connection Cable with open ends on both sides, ready for termination with your preferred connectors.
Subscribe to the newsletter
New arrivals, promotions and exclusive offers — straight to your inbox.
Please complete your information below to login.
Sign In
Create New Account