PD Connex RX13 Speaker Cable 2x 1,5mm 305m Black

PD Connex RX13 Speaker Cable – 2x 1.5mm², 305m, Black

The PD Connex RX13 is a professional-grade loudspeaker cable designed for fixed installation in private and commercial audio setups. With a cross-section of 1.5 mm² and a total length of 305 metres, it provides reliable signal transmission for passive speakers and distributed audio systems.

• 2x 1.5 mm² CCA conductor delivers sufficient power handling for standard installation speakers
• 305 m total length supports long cable runs in multi-room or large-venue setups without signal loss
• Black outer sheath blends discreetly into cable trays, conduits, and behind-wall routing
• CCA (copper-clad aluminium) construction offers a cost-effective conductor solution while maintaining adequate conductivity for installation use

What sets the RX13 apart

The RX13 is built for straightforward, no-fuss installation. The round cable geometry and flexible CCA conductor make routing through conduits and cable trays easier than rigid alternatives, while the 305 m spool length reduces the need for intermediate splice points in continuous runs.

Ideal for

Fixed audio installations in private homes, small offices, hospitality venues, and retail environments where passive speakers need a permanent, clean connection. The 1.5 mm² cross-section is well suited for runs up to 30 metres at typical installation power levels.

Application of PD Connex RX13

1. Route the cable from the amplifier or DSP output to each speaker position
2. Strip the outer sheath at both ends to access the two individual 1.5 mm² conductors
3. Connect each conductor to the corresponding speaker terminal (positive/negative)
4. Secure connections with appropriate terminals or soldering, then route and fasten the cable along the planned path