OEM radial ball bearing, 6 mm bore × 10 mm OD × 3 mm wide, set of 10 pieces. Precision tolerances for smooth RC model drivetrain and steering applications. 6-month manufacturer warranty included.
The OEM Ball Bearing 6x10x3mm is a radial deep-groove ball bearing engineered for smooth, low-friction rotation in small-scale mechanical assemblies. With a 6 mm bore, 10 mm outer diameter, and just 3 mm width, it is optimised for tight-fit applications where space is limited.
Radial ball bearing design ensures even load distribution across the raceways, reducing wear during continuous rotation
6 mm inner diameter fits standard small-diameter shafts commonly used in RC steering and drivetrain assemblies
10 mm outer diameter and 3 mm width keep the bearing compact enough to integrate into tight gearboxes and wheel hubs
24-month manufacturer warranty provides long-term reliability assurance for hobby and workshop use
Das zeichnet das OEM Ball Bearing 6x10x3mm aus
Unlike generic bearings, this OEM-spec unit is manufactured to consistent tolerances, ensuring uniform running smoothness across all 10 pieces in the set. The deep-groove raceway geometry supports both radial and light axial loads, making it versatile for a range of RC model applications beyond simple wheel rotation.
Ideal für...
RC hobbyists and model builders working with steering linkages, wheel assemblies, gearboxes, and small electric motors. The compact 6×10×3 mm dimensions are specifically suited to the tight internal clearances found in 1:10 and 1:12 scale RC vehicles and accessories.
Anwendung von OEM Ball Bearing 6x10x3mm
Press or slide the bearing onto a clean, 6 mm shaft — ensure no debris enters the raceway during installation
Verify the 10 mm outer diameter seats fully in the housing bore without forcing, to avoid burring the edges
Lubricate with a light machine oil or bearing grease rated for low-speed, high-precision applications
For best longevity, store unused bearings in their original packaging in a dry, dust-free environment
OEM is a generic manufacturer label used for replacement and spare parts across the RC modelling and general hardware sectors. Products under this brand are typically sourced as OEM-spec components — designed to meet original equipment dimensional and tolerance standards rather than carrying a proprietary brand identity. The brand_summary for OEM covers a wide range of industrial and hobby components, including bearings, fasteners, and mechanical fittings.
It is a radial deep-groove ball bearing used in RC model steering linkages, wheel assemblies, gearboxes, and small electric motor shafts where a compact 6 mm bore and 10 mm outer diameter are required.
Inner diameter (bore): 6 mm. Outer diameter: 10 mm. Width: 3 mm. These are OEM-spec tolerances, not metric approximations.
Each set contains 10 pieces, all matching the 6×10×3 mm specification.
The manufacturer provides a 24-month warranty against defects in materials and workmanship under normal operating conditions.
The deep-groove raceway design supports moderate radial loads and light axial loads in both directions, making it suitable for the combined load conditions typical in RC drivetrain assemblies.
Subscribe to the newsletter
New arrivals, promotions and exclusive offers — straight to your inbox.
Please complete your information below to login.
Sign In
Create New Account