Kärcher Foam Filter WD 1/MV 1

Kärcher Foam Filter WD 1/MV 1

The Kärcher foam filter WD 1/MV 1 is a replacement pre-filter for Kärcher wet/dry vacuum cleaners in the WD 1 and MV 1 series. It captures coarse dust, debris, and larger particles before they reach the main filter, extending the life of the primary filtration stage.

• Pre-filter for Kärcher WD 1 and MV 1 wet/dry vacuums
• Foam construction captures coarse dust and debris effectively
• Reusable after cleaning — rinse with water and allow to dry
• Lightweight at 19 g, easy to handle and install

Das zeichnet den Kärcher Schaumstofffilter WD 1/MV 1 aus

The foam filter is designed specifically for the Kärcher WD 1 and MV 1 vacuum lines. Its open-cell foam structure allows high airflow while trapping larger particles that would otherwise clog the main filter. The compact, lightweight design slots directly into the existing filter housing without modification.

Ideal für...

Homeowners and workshop users who operate Kärcher WD 1 or MV 1 wet/dry vacuums and want to maintain peak suction performance. The filter is particularly suited for environments with fine dust, wood shavings, or dry debris where the pre-filter takes the brunt of particle load.

Anwendung von Kärcher Schaumstofffilter WD 1/MV 1

1. Remove the used filter from the vacuum's filter housing
2. Rinse the foam filter under running water to dislodge accumulated dust
3. Allow the filter to dry completely before reinserting
4. Replace the filter periodically when foam structure shows signs of wear or permanent clogging