EP Radial Ball Bearing 5x10x4mm

EP Radial Ball Bearing 5x10x4mm – Compact Precision Bearing for RC Models

The EP Radial Ball Bearing 5x10x4mm is a compact radial ball bearing designed for RC model applications requiring low-friction rotation in limited spaces. With an inner diameter of 5mm, an outer diameter of 10mm, and a width of 4mm, it fits standard RC drivetrain and wheel hub configurations.

• Radial ball bearing design ensures smooth, low-friction rotation under moderate loads
• Compact 5×10×4mm dimensions fit tight RC drivetrain and wheel hub spaces
• Paired set of 2 bearings enables dual-wheel or dual-shaft installations
• Lightweight construction at 35g total keeps overall model weight minimal

Das zeichnet EP Kugellager aus

The EP brand delivers standardized metric bearings with consistent dimensional tolerances. The radial ball bearing configuration handles both radial and light axial loads, making it suitable for the drive trains and steering mechanisms common in RC cars, trucks, and boats.

Ideal für...

RC model builders and workshop technicians working with 5mm shaft or axle setups. The 10mm outer diameter pairs with standard RC wheel hubs, while the 4mm width suits compact gearboxes and differential assemblies where space is constrained.

Anwendung von EP Kugellager 5x10x4mm

1. Press or slide the bearing onto a 5mm shaft or axle
2. Ensure the outer diameter (10mm) seats fully in the housing or hub
3. Verify smooth rotation by hand before installing the wheel or gear
4. Install the second bearing on the opposing side for a paired setup