Delock SATA Cable UV Blue Effect 50 cm

Delock SATA Cable UV Blue Effect – 50 cm SATA Data Link with UV-Reactive Sheathing

The Delock SATA Cable UV Blue Effect is a 50 cm internal SATA data cable with a UV-reactive blue jacket that visually highlights the cable path inside a PC case. It connects one SATA device to another SATA port on the motherboard or controller, maintaining full SATA III bandwidth.

• UV-reactive blue jacket makes the cable stand out inside the case for a clean, custom look
• 50 cm length provides enough reach for most internal drive layouts without excess cable clutter
• Straight connectors on both ends — no angled bend that could interfere with airflow or adjacent components
• Single SATA output supports one drive connection per cable

What sets the Delock SATA Cable apart

The UV-reactive blue sheathing is not just cosmetic — it allows users to trace and identify specific SATA data paths inside a case, which is especially helpful in builds with multiple drives or custom cable management. The straight connector design on both sides avoids the clearance issues that angled SATA connectors can cause in tight chassis layouts.

Ideal for...

PC builders and enthusiasts who want a visible, organised internal cable run. The 50 cm length suits standard ATX and mid-tower cases where drives are mounted in the lower bay area. Not suited for drives that require a longer reach — in that case, a different cable length should be selected.

Application of the Delock SATA Cable

1. Connect one end to the SATA port on the motherboard or SATA controller card
2. Connect the other end to the SATA data port on the hard drive or SSD
3. Route the cable along the case channel or behind the motherboard tray for a clean appearance
4. The UV-reactive blue jacket becomes visible under case lighting or UV LED setups, highlighting the cable path