Delock DL4 Solar Splitter Cable 1x Socket to 2x Plug 30cm

Delock DL4 Solar Splitter Cable – Compact 1-to-2 Solar Cable for MC4, TS4 and QC4 Connectors

The Delock DL4 Solar Splitter Cable is a compact 30 cm cable that splits a single solar cable socket into two output sockets. It enables a single solar panel connection to be shared between two downstream devices or cables without the need for additional junction boxes.

• Splits one solar cable into two outputs, simplifying panel-to-inverter wiring in compact installations
• 4 mm² cross-section ensures low resistance and safe current carrying for standard solar panel setups
• Compatible with MC4, TS4 and QC4 connectors on both sides — fits the most common solar connector types
• Red cable colour provides clear polarity identification in solar cable runs

Das zeichnet das Delock DL4 aus

The DL4 uses a robust socket-to-plug design with a 4 mm² conductor cross-section, rated for the current and voltage levels typical of residential solar installations. The compact 30 cm length keeps cable runs short and tidy, reducing voltage drop in split configurations.

Ideal für...

Home solar installations where a single panel output needs to feed two cables or devices, such as connecting a panel to both a charge controller and a battery monitor. Also suited for small-scale solar setups in gardens, sheds or balconies where space is limited and a splitter avoids the need for a separate junction box.

Anwendung von Delock DL4 Solar Splitter Cable

1. Connect the panel-side cable to the socket end (Side A) of the splitter
2. Run the two plug ends (Side B) to the MC4, TS4 or QC4 inputs of your charge controller and second device
3. Ensure the red cable is connected to the positive polarity path in your solar circuit
4. Secure all MC4/TS4/QC4 connections with the appropriate locking clips for vibration resistance