Axing BAK 250-80 Antennenkabel 2.5 m

Axing BAK 250-80 – 2.5 m Coaxial Antenna Cable with IEC Connector

The Axing BAK 250-80 is a 2.5-metre coaxial antenna cable designed for private-installation use. It features a standard IEC connector on one end and a KDG1 plug on the other, making it suitable for connecting indoor antennas to DVB-T2 receivers, set-top boxes, or IPTV devices.

• 2.5 m cable length provides flexible routing between antenna and receiver without excess slack
• Coaxial construction with 75-ohm impedance ensures reliable signal transmission for DVB-T2 and DVB-C reception
• IEC connector on one end and KDG1 plug on the other covers the most common German and European receiver interfaces
• Compact 112 g weight makes it easy to route along walls, behind furniture, or through cable channels

Das zeichnet das Axing BAK 250-80 aus

Unlike generic patch cables, the BAK 250-80 is purpose-built as an installation cable for permanent or semi-permanent antenna setups. The 2.5-metre length is optimised for typical room-to-receiver distances in private homes, avoiding signal loss from excessively long runs while providing enough slack for clean routing.

Ideal für...

Home users installing or replacing a DVB-T2 antenna cable in living rooms, attics, or wall-mounted setups. Suitable for households with a roof antenna, balcony antenna, or indoor set-top antenna that needs a reliable connection to a satellite receiver, IPTV box, or DVB-C tuner.

Anwendung von Axing BAK 250-80

1. Connect the IEC connector to the antenna output or wall plate
2. Route the 2.5 m cable to the receiver location
3. Plug the KDG1 end into the coaxial input of the DVB-T2 receiver, set-top box, or IPTV device
4. Secure the cable along the wall or behind furniture using cable clips for a clean installation